Loading ...
Loading ...
Loading ...
9. Sometimes the burners will not ignite immediately and seem
to ‘blow’ slightly when they do ignite. This is usually due to air in
the gas lines, which will clear itself within minutes of use.
10. If after following the instructions given, satisfactory
performance cannot be obtained, contact your local gas authority
for advice and assistance.
ELECTRICAL CONNECTION
The connection of the hobs to mains is effected via the flex and the
three pin plug located underneath the hotplate. The appliance
operates at a main voltage of 120V a.c., frequency: 60Hz. Electric
power absorption is about 1W for 5 gas burners version or 2W for 6
gas burners version.
WARNING: Electrical Grounding Instructions: This appliance is
equipped with a (three-prong) grounding plug for your protection
against shock hazard and should be plugged directly into a properly
grounded receptable. Do not cut or remove the grounding prong
from this plug.
WIRING DIAGRAMS (see Fig. 12.)
Wiring diagram description:
1. Cable terminal 2. Ignition switch 3. Spark generator
4. Ignition spark L. Black N. White T. Green (earth)
INSTALLATION GUIDE
8
Loading ...
Loading ...
Loading ...