Loading ...
Loading ...
Loading ...
How to Connect Tools
Tools may be attached directly to the hose or onto
the telescoping wand.
All tools attach in the same manner.
4.5 Slide tool onto hose or wand. Snap tool over tab
(A) on hose or wand.
To remove tool: Push forward and up on latch (B).
Slide tool off hose or wand.
USING THE TOOL
4.6 Squeeze and hold trigger (A) in hose grip to
release
cleaning solution.
Let go of trigger and pull tool over same area to pick
up dirty solution without putting down more solution.
The handle must be in the upright position in order to get cleaning solution through the hose.
It may be necessary to remove air from the system (prime the pump) so the clean solution will flow to
the tool. After attaching the tool to the hose, turn the cleaner ON. Put the tool against your hand to block
off the suction. Wait a few seconds, then squeeze the trigger and begin cleaning.
IMPORTANT
4.5
A
B
B
A
4.6
A
12
Loading ...
Loading ...
Loading ...