Loading ...
Loading ...
Loading ...
11
PICKING UP SPILLS
Your cleaner may also be used to pick up small
liquid spills (1 quart or less, never to exceed 1/4 inch
in depth) on non-carpeted floors. Turn Mode
selector dial to the WASH position and release the
trigger. Continue to move cleaner over the area to
pick up the spill.
CAUTION
! !
Do not use the cleaner to pick up flammable or
combustible liquids or chemicals. Do not use
the cleaner to pick up detergents that contain
solvent based ingredients.
4. HOW TO USE TOOLS
SELECT TOOL
A. Floor swivel tool
• Swivel head
• 2 rows of brushes
• Use to clean small, tight areas
B. Grout tool
• Stiff brushes to use for more concentrated
cleaning on stubborn grout stains
ATTACH HOSE AND TOOL
How to Connect Hose
4.2 Open hose door (A) on side of cleaner.
4.3 Align hose connector (B) with hose and solution
ports (C).
Insert hose connector (B) until it snaps in place.
To disconnect hose: Squeeze the hook (D) on
bottom of hose connector. Remove hose from port.
Close hose door tightly.
How to Connect Telescoping Wand
4.4 Slide wand (A) onto hose end (B). Snap wand
over tab (C) on hose.
To extend telescoping wand, pull button (D) toward
you and pull wand away from you to the desired
length. The full extension of the wand is indicated
by a ‘MAX’ line. It is recommended you do not
extend the wand past this line.
To remove wand: Push forward and up on latch (E).
Slide wand off hose.
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug cleaner.
4.1
A
B
4.2
4.3
A
B
C
D
4.4
D
A
C
E
B
Loading ...
Loading ...
Loading ...