Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 73
(Continued)
6. Swing the frame bracket around the side of
the rail, and insert the screws from under-
neath. Tighten with #40 Torx head driver
until they are snug, being careful not to
cross-thread the screws or overtighten.
Refer to the table above for the appropriate
torque specifications for the door rail
screws.
Step Six
Door Frame Installation Two Door Models —
If Equipped
1. Carefully place the front door rail in the
rubber seal at the top of the windshield,
and line up the holes for the Torx head
screws (two for each door).
2. Swing the frame bracket around the side of
the rail, and insert the screws from under-
neath. Tighten with #40 Torx head driver
until they are snug, being careful not to
cross-thread the screws or overtighten.
Refer to the table below for the appropriate
torque specifications for the door rail
screws.
Step Two
SOFT TOP TWO DOOR MODELS — IF
EQUIPPED
Torque
Specification
For Torx
Screws
Maximum Minimum
8.8 in-lbs 11.0 in-lbs 6.6 in-lbs
12 N·m 15 N·m 9 N·m
CAUTION!
Do not overtighten the screws. You can strip
the screws if they are overtightened.
WARNING!
Do not drive the vehicle with the rear
window up/removed unless the quarter
windows are also removed. Dangerous
exhaust gases could enter the vehicle
causing harm to the driver and passengers.
2
20_JL_OM_EN_USC_t.book Page 73
Loading ...
Loading ...
Loading ...