Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 43
High/Low Beam Switch
Push the multifunction lever toward the instru-
ment panel to switch the headlights to high
beams. The lever will return to the centered
position. To return the headlights to low beam,
pull the lever toward the steering wheel, or push
the lever toward the instrument panel.
Multifunction Lever
Automatic High Beam — If Equipped
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automating high beam control through
the use of a digital camera mounted on the
vehicle’s header. This camera detects vehicle
specific light and automatically switches from
high beams to low beams until the approaching
vehicle is out of view.
NOTE:
The Automatic High Beam Headlamp Control
can be turned on or off by selecting “ON”
under “Auto High Beam” within your
Uconnect settings, as well as turning the
headlight switch to the AUTO position and
placing the multifunction lever in the high
beam position. Refer to “Uconnect Settings”
in “Multimedia” for further information.
Broken, muddy, or obstructed headlights and
taillights of vehicles in the field of view will
cause headlights to remain on longer (closer
to the vehicle). Also, dirt, film, and other
obstructions on the windshield or camera
lens will cause the system to function improp-
erly.
Flash-To-Pass
You can signal another vehicle with your head-
lights by lightly pulling the multifunction lever
toward you. This will cause the high beam head-
lights to turn on, and remain on, until the lever
is released.
Automatic Headlights — If Equipped
This system automatically turns the headlights
on or off according to ambient light levels. To
turn the system on, rotate the headlight switch
clockwise to the last detent for automatic head-
light operation. When the system is on, the
headlight time delay feature is also on. This
means the headlights will stay on for up to 90
seconds after you place the ignition into the OFF
position. To turn the automatic system off,
move the headlight switch out of the AUTO posi-
tion.
NOTE:
The engine must be running before the head-
lights will come on in the automatic mode.
2
20_JL_OM_EN_USC_t.book Page 43
Loading ...
Loading ...
Loading ...