Loading ...
Loading ...
Loading ...
19
LOAD THE WASHING MACHINE
STARTING YOUR WASHING MACHINE
When loading the clothes into your
washing machine, there are four things
to remember:
Clothes must be loaded evenly around the
agitator.
For best result load small items first, followed
by large items.
1.
1.
Clothes must not be wrapped around
the agitator.
For example, a typical load should be loaded
using the following sequence : handkerchiefs,
wash cloths, undershorts, pillow cases,
T-shirts, business shirts, tablecloths, sheets,
bath towels.
2.
The washing machine must not be overloaded.
Clothes must be able to move during wash.
3.
The load should contain only three or four large
items, for example sheets. The rest of the load
should be small items. A mixed load of large
and small items will wash cleaner than a load of
all large items.
4.
DAILY USE5.
Connect the mains plug to the mains socket.
2.
Turn the water tap on.
ADD THE DETERGENT
When using the washing machine for
the first time,check that the dispenser
is set for the type of detergent you will
use. To do this, proceed as follows:
Pull the dispenser drawer forward
until it stops.
1.
Lift the front of the drawer up and
forward to
remove it from the runners.
2.
Check the position of the flap at the
rear of the detergent compartment in
the dispenser drawer.
(Factory setting is flap up for powder.)
3.
Clip the flap down if you intend to
use liquid detergent.
Remember: If you change the type
of detergent you use, the position
of the flap will need changing.
See picture.
4.
Refit the dispenser back into its runners.
5.
clip flap down for
liquid
You are now ready to add detergent.
Measure the amount required and pour
it into the detergent compartment of
the dispenser drawer.
6.
add detergent
clip flap up for
powder
5.1
5.2
5.3
Loading ...
Loading ...
Loading ...