Loading ...
Loading ...
Loading ...
6. Press the button repeatedly until the sym‐
bol shown is displayed, arrow.
7. Press and hold the button until the display
changes.
8. Press the button to select:
▷
Daytime running lights are activated.
▷
Daytime running lights are deactivated.
9. Hold the button down.
The setting is stored for the remote control cur‐
rently in use.
Welcome lamps
If the light switch stays in switch position 2 or 3
after the vehicle is switched off, the parking
lamps and the interior lamps light up for a cer‐
tain period when the vehicle is unlocked.
Headlamp courtesy delay feature
The low beams stay lit for a short while after
the ignition is switched off, if the lamps are
switched off and the headlamp flasher is
switched on.
Setting the duration
1.
Switch on the ignition.
2. Press the button on the turn indicator lever
repeatedly until "SET/INFO" is displayed.
3. Press and hold the button until the display
changes.
4. Press the button repeatedly until the sym‐
bol and "SET" are displayed.
5. Press and hold the button until the display
changes.
6. Press the button repeatedly until the sym‐
bol shown is displayed, arrow.
7. Press and hold the button until the display
changes.
8. Press the button to select:
▷
The function is deactivated.
▷ ...
Select the duration, e.g. 40 seconds.
9. Hold the button down.
The setting is stored for the remote control cur‐
rently in use.
Adaptive Light Control
The concept
Adaptive Light Control is a variable headlamp
control system that enables dynamic illumina‐
tion of the road surface.
Seite 76
Controls
Lamps
76
Online Edition for Part no. 01 40 2 911 475 - VI/13
Loading ...
Loading ...
Loading ...