Loading ...
Loading ...
Loading ...
Troubleshooting
Built-In Advantium Oven
Questions?
Use this
problem
solver
Problem Possible Causes What To Do/Explanation
LIGHTS
Light during a speedcook
cycle dims and cycles
on and off, even at full
power levels
This is normal.
Power level has been
automatically reduced
because the oven is hot.
This is normal. The oven senses the
heat level and adjusts automatically.
Light visible around the
door and outer case
while speedcooking
This is normal. When the oven is on, light may be
visible around the door and outer case.
COOLING FANS
Fan continues to run
after cooking stops
The oven is cooling. The fans will automatically shut off
when the internal parts of the oven have
cooled.
Oven vent emits warm air
while oven is on
This is normal.
Fan comes on
automatically when using
the microwave
This is normal.
COOKING
The oven makes unusual
sounds while cooking
Clicks are normal. The
control is turning the
components on and off.
These sounds are normal.
Fan noise is normal.
Fans are required to keep
the oven components
and controls cool.These
sounds are normal.
Smoke comes out of the
oven when I open the
door
Food is high in fat
content. Aerosol spray
used on the pans.
Smoke is normal when cooking high-fat
foods.
Food is not fully cooked
or browned at the end of
a program
Programmed times may
not match the sizeor
amount of food you are
cooking.
Adjust time for doneness or adjust the
upper or lower lamps for browning and
cooking doneness.
SENSOR ERROR
displayed along with an
oven signal
Food amount or type
placed in the oven does
not match the program
that was set.
Press the CANCEL/OFF pad. Set the
oven program to match the food or
liquid to be cooked or heated.
Steam was not sensed by
the oven because plastic
wrap was not vented,
a lid too tight was on
the dish or a liquid was
covered.
Vent plastic wrap, use a looser lid
or uncover liquids when cooking or
heating.
34
Loading ...
Loading ...
Loading ...