Loading ...
Loading ...
Loading ...
6
|
SIDE BURNER ACCESSORY CARE & USE/INSTALLATION
VISIBLE LOSS OR DAMAGE
Be certain any visible damage to the carton is noted on freight
bill or express receipt and signed by the person making delivery.
FILE CLAIM FOR DAMAGES IMMEDIATELY, regardless of extent of
damage.
CONCEALED LOSS OR DAMAGE
If damage is unnoticed until the accessory is unpacked, nontify
the transportation company or carrier immediately and le a
“concealed damage” claim with them. This should be done
within (15) days of the date delivery is made to you. Be sure
to hold on to the container for inspection. We cannot assume
responsibility for damage or loss incurred in transit. (See INDEX:
“Obtaining Service” for further details.)
• Never install this product into a combustible enclosure. Doing so could result in re, property damage and personal
injury.
• Never locate the accessory under a roof or overhang, in a building, garage, shed or other such enclosed area.
• Always maintain the required clearances from combustibles as detailed. Accessories are designed for outdoor use only.
Never use in a garage, building, shed, breezeway, or other enclosed area. Do not use this equipment under any unpro-
tected overhead combustible construction.
• Installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI
Z223.1/NFPA 54, or Natural Gas and propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2, in Canada.
BEFORE YOU START
WARNING
IF SHIPMENT ARRIVES DAMAGED
IMPORTANT NOTES
WHERE’S THE WIND?
When selecting a suitable location, consider important factors
such as exposure to the wind and foot-tra c
patterns.
If you have a freestanding grill, position it so the prevailing wind
blows into the front control panel (at your back when grilling),
supporting the proper front-to-rear air ow.
Built-in accessories located in areas with prevailing winds should
be protected by a wind barrier.
HOW LONG IS YOUR RUN?
Keep all gas supply lines as short as possible because gas lines
lose pressure over distance and with each elbow and tee that is
added. This drop in pressure a ects accessory performance. (See
INDEX: “Gas Supply Line Runs” for further details.)
ARE YOU “ONTHELEVEL”?
Proper leveling during installation is critical. An accessory that is
out of level will cause erratic burner combustion and ine cient,
uneven heating. A carpenter’s spirit level should be used to level
the accessory both front-to-back and side-to-side.
If the oor is uneven or has a decided slope, re-leveling may
be required each time you move a freestanding unit.
Loading ...
Loading ...
Loading ...