Loading ...
Loading ...
Loading ...
8
NS-SB216
www.insigniaproducts.com
Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the first time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
Setting up your soundbar
First step - Choosing your connection
• Look at the back of your sound source device, such as a TV, DVD/Blu-ray
player, or cable box, to identify your audio output ports. Choose one
connection option below that fits your audio source. You can connect
several devices and switch the sound source as required.
Cautions
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet
surface.
• Do not place the remote control in direct
sunlight or near sources of excessive heat.
• If the remote control is not going to be used for
a long time, remove the battery to avoid any
damage that may be caused by leakage and
corrosion.
Caution
Turn off all devices while you are making connections.
Audio
Quality
Jack Type (on
source device)
Cable
Best
Digital Optical cable (not included). See “Digital Optical
connection (best)” on page 9.
Good
RCA audio cable (included). See “RCA connection (good)” on
page 10.
Good
3.5 mm audio cable (adapter included). See “3.5mm
connection (good)” on page 10.
IR sensor
NS-SB216_16-0248_MAN_V1_ENG.fm Page 8 Wednesday, July 6, 2016 11:42 AM
Loading ...
Loading ...
Loading ...