Loading ...
Loading ...
Loading ...
10
Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water may be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Whites and pastels
Durable garments
Heavy soils
8. Select cycle modiers
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modiers buttons to change the Temp
Level, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
10. Press START/PAUSE/UNLOCK
to begin wash cycle
Press the START/PAUSE/UNLOCK button to start the wash
cycle. When the cycle has nished, the DONE indicator will
light up. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/UNLOCK; the lid will unlock once
the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close lid
and press START/PAUSE/UNLOCK again to restart the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
9. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Suggested Fabrics
Loading ...
Loading ...
Loading ...