Loading ...
Loading ...
Loading ...
en
23
Fault Possible cause Remedial action
Freezer compartment
temperature display flashes.
Fig. "/4
Warning signal sounds.
The alarm button is lit.
Fig. "/5
The freezer compartment is
too warm!
Frozen food is at risk!
To switch off the warning signal, press
the “alarm” button, Fig. "/5.
Appliance is open. Close the appliance.
Ventilation openings have
been covered.
Ensure that there is adequate ventilation.
Too much food was placed
in the freezer compartment
at once.
Do not exceed max. freezing capacity.
When the fault has been eliminated, the alarm
display goes out shortly afterwards.
Freezer compartment
temperature display flashes.
Fig. "/4
A fault caused the freezer
compartment to become too
warm in the past.
When the alarm button 5 is pressed, the
temperature display stops flashing. Fig. "/4
The temperature display indicates for 5
seconds the warmest temperature which was
reached in the freezer compartment.
Appliance is not cooling,
temperature display and light
are lit.
Showroom mode is
switched on.
Hold down alarm button, Fig "/5, for
10 seconds until an acknowledgement signal
sounds.
After a short time check whether your
appliance is cooling.
Automatic super freezing
does not switch on.
The appliance decides independently whether
automatic Super freezing is required and
automatically switches it on or off.
Loading ...
Loading ...
Loading ...