Loading ...
Loading ...
Loading ...
en
22
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice – even if the appliance is still under
guarantee!
Fault Possible cause Remedial action
Temperature differs greatly
from the set value.
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has
approached the set value.
If the temperature is too low check
the temperature again the next day.
Displays do not illuminate. Power failure; the fuse has
been switched off; the mains
plug has not been inserted
properly.
Connect mains plug. Check whether the power
is on, check the fuses.
Temperature display
indicates “E..”.
Electronics have detected
a fault.
Call customer service.
Warning signal sounds,
“alarm” button lights up.
Fig. "/5
The freezer compartment
is too warm!
Frozen food is at risk!
To switch off the warning signal, press the
“alarm” button 5.
Appliance is open. Close the appliance.
Ventilation openings have
been covered.
Ensure that there is adequate ventilation.
Too much food was placed
in the freezer compartment
at once.
Do not exceed max. freezing capacity.
When the fault has been eliminated,
the “alarm” button 5 goes out shortly
afterwards.
Loading ...
Loading ...
Loading ...