Loading ...
Loading ...
Loading ...
8
ASSEMBLING THE PRECISE HEAT MIXING BOWLASSEMBLING THE PRECISE HEAT MIXING BOWL
Before rst use
Attaching the Precise Heat Mixing Bowl to Stand Mixer
Bowl-Lift Stand Mixer
3
Fit the handles on the Stand Mixer bowl
support arms, and press down on the
back of the Precise Heat Mixing Bowl
to snap it into the bowl-lift.
2
Place the bowl-lift lever on the Stand
Mixer in the down position.
1
Be sure the Stand Mixer’s speed control
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
Before using your Precise Heat Mixing Bowl
for the first time, wash the stainless steel
bowl liner, lid, and stir accessory, soapy
water, then rinse with clean water and dry.
Do not use abrasive cleaners or scouring
pads.
NOTE: These parts can also be washed
in the top rack of the dishwasher.
4
If desired, attach the appropriate
accessory for your recipe. Then rotate
the Stand Mixer bowl-lift lever back in
the up position.
The Precise Heat Mixing Bowl can either be used by itself, or attached to a KitchenAid
®
Stand Mixer with the lid removed. Before attaching the Precise Heat Mixing Bowl to a
Stand Mixer decide how to attach it by determining which model Stand Mixer you have.
Use the handles to attach the Precise Heat Mixing Bowl to the Stand Mixer.
The Precise Heat Mixing Bowl can either be
used by itself, or attached to a KitchenAid
®
Stand Mixer with the lid removed. When
using the Precise Heat Mixing Bowl alone,
see the “Using the Precise Heat Mixing
Bowl” section.
NOTE: When using the Precise Heat
Mixing Bowl by itself, place it on a flat,
level surface.
W10719715A_EN-Final.indd 8 11/18/14 1:21 PM
Loading ...
Loading ...
Loading ...