Loading ...
Loading ...
Loading ...
ALWAYS REMEMBER: Battery water and water containing additives
(such as starch, perfume or fabric conditioner condensed water from
driers) may not be used. Such additives can affect the properties of
the steam and, at high temperatures, can form deposits in the steam
chamber, which will mark the laundry when they are emitted through
the steam vents.
Descaling liquids/agents should not be used.
4 • Filling with Water
- Ensure the iron is unplugged.
- Slide the variable steam control completely to the left.
- Rest the iron on heel and tilt it forward approximately
1 inch.
If the iron is equipped with a covered filling inlet, open
the filling inlet by sliding the cover down.
- Fill with water (containing no additives) to the max
mark on the water tank.
- If equipped with filling inlet cover, slide cover to close.
If you need to add water during ironing, UNPLUG the
iron and follow the steps above. Ensure iron heats back
to temperature afterwards, that means thermostat light
will go out.
5 • Selecting the Temperature
Set the iron temperature to suit the type of material
using the temperature control dial (fig.3).
Check the garment label for appropriate setting. We recommend
using the chart below as a guide.
7
Loading ...
Loading ...
Loading ...