Loading ...
Loading ...
Loading ...
• Check the alignment with the front edge of the unit and with the middle line, and then fit another screw
4*10 into the other long slot.
• Then tighten both of these screws.
• Place the appliance in the housing unit and using your hands push on both sides of the back of the oven
interior to move the appliance into position. It will engage in position when it is correctly installed.
• Check that it is correctly aligned.
• If it is not aligned correctly, carefully pull it back out of the niche and realign it by slightly adjusting the
position of the bracket on the long slots.
• When correctly aligned, insert the third screw 4*10 into the middle of the bracket to prevent the bracket
moving out of position.
• Slide the appliance into the housing unit, and pull the cable with the plug* through the back of the unit.
• Insert one screw 4*35 into the middle of the frame and put on the screw cap.
* Plug shown is for illustration purposes only.
• Connect the appliance to the electricity supply.
• Then push the appliance right back into the housing unit as described above.
19ILVE Operating Manual
IV600BIM Microwave Manual 2014 V1.indd 19 22/05/2014 5:46 pm
Loading ...
Loading ...
Loading ...