Loading ...
Loading ...
Loading ...
When installing the appliance, ensure that the vent outlets at the front of the appliance are not hindered,
and that there is adequate ventilation to the rear of the housing unit by leaving a large enough gap (see
diagram: 50 mm x unit width). Do not block the ventilation gaps with any objects. The appliance is
designed to be built into a tall unit. To transport the appliance, make sure that you lift it by the appliance
housing and not by the frame. The frame is not sturdy enough to bear the weight of the appliance when it
is being carried. Building-in dimensions:
The appliance must be built in before it can be used. Otherwise it poses an electric shock hazard.
• Draw a line inside the housing unit to mark the middle of the unit as illustrated.
• Position the fitting bracket on this middle line.
Use the indented mark on the bracket to guide you.
• Fit one screw 4*10 into the centre of the first long slot.
InstallationInstallation
18 ILVE Operating Manual
IV600BIM Microwave Manual 2014 V1.indd 18 22/05/2014 5:46 pm
850
50
390
390
368
595
595
560-595
380-390
380-390
560-595
Loading ...
Loading ...
Loading ...