Loading ...
Loading ...
Loading ...
316
%
*
[SV39850(ALL)02/95]
Aiming Headlamps
[SV39901(ALL)02/95]
Your vehicle is equipped with a Vehicle
Headlamp Aim Device (VHAD) on the
headlamp reflector extension and headlamp
housing. Each headlamp may be properly aimed
in the horizontal direction (left/right) and the
vertical direction (up/down) by performing the
steps outlined in the following paragraphs. The
horizontal aim must be adjusted first.
[SV39950(ALL)06/95]
Tools required: One 4mm box wrench or open
end wrench.
[SV40050(ALL)04/95]
Position the vehicle on a surface that is level on
the front-to-rear direction.
[SV40075(ALL)04/95]
If the vehicle cannot be placed on a true level
surface, the headlamps still can be adjusted
using the VHAD if the slope of the surface is
accurately known and does not differ by more
than 1.2˚ from true level. A difference of 2.27
inches in height of the surface between the front
and rear wheels corresponds to 1.2˚ slope.
[SV40100(ALL)04/95]
If the vertical adjuster is within +/s 4
graduations about zero, the vertical headlamp
aim is within specification; and if the horizontal
adjuster is within +/s 2 graduations about zero,
the horizontal headlamp aim is within
specification.
File:15fcsvt.ex
Update:Tue Jan 23 13:58:51 1996
Loading ...
Loading ...
Loading ...