Loading ...
Loading ...
Loading ...
General instructions
26
2. SAFETY PRECAUTIONS
Consult the installation instructions for safety standards on electrical or gas
appliances and for ventilation functions. In your interests and for your safety the
law requires that the installation and servicing of all electrical and gas
appliances be carried out by qualified personnel in accordance with the
standards in force. Our approved installers guarantee a satisfactory job.
Gas or electrical appliances must always be uninstalled by suitably skilled
people.
Before connecting the appliance to the power grid, check the data on the plate
against the data for the grid itself.
The identification plate, with technical data, serial number and brand name is
clearly visible under the casing.
Do not remove the plate on the casing for any reason.
Before connecting the appliance, ensure that it is set to the type of gas that it will
be supplied with, checking the label applied under the casing.
Before carrying out installation/maintenance work, make sure that the appliance
is disconnected from the power grid.
The plug to be connected to the power supply cable and its socket must be of
the same type and conform to the standards in force. The socket must be
accessible after the appliance has been installed. Never disconnect the plug by
pulling on the cable.
If the power supply cable is damaged, contact the technical assistance centre
immediately and they will replace it.
The appliance must be connected to earth in compliance with electrical system
safety standards.
Immediately after installation, carry out a quick test on the appliance following
the instructions provided later in this manual. Should the appliance not function,
disconnect it from the power supply and call the nearest technical assistance
centre.
Never attempt to repair the appliance.
The appliance becomes very hot during use. Take care never to touch the
heating elements.
Loading ...
Loading ...
Loading ...