Loading ...
Loading ...
Loading ...
13
Care and Cleaning
To ensure your iron maintains optimum
performance, it is recommended that it
be cleaned using the Self-Clean function
to remove scale or impurities.
• Set the Steam Control to the
DRY position.
• Fill the water tank up to the
maximum level (MAX) with the
water cup supplied.
• Set the Temperature Control to MAX
(Linen) setting.
• Place the iron in the upright position,
insert the plug into the power outlet
and switch the iron on.
• Allow the iron to heat for two to five
minutes so that the iron reaches the
set temperature.
• Switch the iron off at the power outlet
and remove the plug.
• Hold the iron horizontally over the sink.
• Press and hold the Self–Clean button.
• Water will drip through the holes in the
soleplate. Hold iron until all water has
dripped out of the water tank.
NOTE: Once you have used the
Self-Clean function, it is normal
for some water to remain in the
water tank. This is due to the
Anti-Drip System preventing
the tank from being emptied
completely. This will not affect the
performance of the iron.
Repeat the Self Clean process if the iron
still contains a lot of impurities.
CAUTION: Do not store
the iron with water in the
water tank. Always empty
the tank after use. Ensure
the iron is cool before
storing or wrapping the
cord around the storage
heel facility.
CAUTION: Safety auto-off
is designed as a safety
feature only. Irons should
not be left switched
on deliberately while
unattended. If safety auto-
off has activated and no
further ironing is required,
the iron should be
switched off at the power
outlet and unplugged.
Cleaning the Soleplate and
Exterior
Ensure that the iron is disconnected from
the power outlet.
To remove residue which may have built
up from certain fabric finishes, clean the
soleplate with a rough cloth that has
been soaked in a vinegar and water
solution. Dry thoroughly with a soft cloth.
To clean the steam holes, simply use a
damp cloth to wipe away build-up of lint
or starch from inside the steam holes.
Wipe the outer housing with a soft, damp
clean cloth and polish with a dry cloth.
NOTE: Never use abrasives or
scouring pads to clean the soleplate.
Avoid hard contact with metal
objects. Do not scratch or damage
the surface of the soleplate. Do not
use harsh or abrasive cleaners as
they may damage the surface of the
iron. Never immerse the iron in water
or any other liquid.
Loading ...
Loading ...