Loading ...
Loading ...
Loading ...
9
Stand the iron on its heel and turn the
Temperature Control to MIN.
Plug the power cord into a 230V or 240V
power outlet and switch on. The Power
Indicator light will illuminate.
Select the temperature setting required
by rotating the Temperature Control so
that the desired setting is aligned with the
Temperature Indicator.
Wait for two to five minutes for the iron to
reach the set temperature.
NOTE: For delicate materials such
as synthetic or silk, rotate the
Temperature Control between MIN
andsetting•andtesttemperature
by ironing on a small discreet part
of the fabric. Once the desired
temperature is found between MIN
andsetting•,continueironingonthe
rest of the delicate material.
Steam Ironing
When filling the iron with water, ensure
that the iron is unplugged. Set the Steam
Control to the DRY position and holding
the iron at an angle use the water cup
supplied to fill the water tank. Never
exceed the maximum water level as
indicated (MAX) on the side of the
water tank.
Tap water can be used in your Kambrook
iron unless it is particularly hard, in which
case it is recommended that distilled or
demineralised water be used.
CAUTION: Always test
the iron on a small discreet
part of the fabric to be
ironed to ensure the
temperature is not set
too high.
CAUTION: The iron
incorporates a thermal
safety fuse to protect the
iron from overheating.
However the iron should
not be left unattended
while it is connected to
the power outlet. Special
care should always be
taken when there are
children in the home/
vicinity of the iron.
To Operate the Steam Control
As per the indications on the
Temperature Control and in Table A
(See section ‘Setting the Temperature’ on
page 8) steam ironing is only
possible at higher ironing temperatures,
indicated with Cotton/ Linen on the
Temperature Control.
Stand the iron on its heel and turn the
Temperature Control to MIN.
Plug the power into a 230V or 240V
power outlet and switch the power on.
Set the Temperature Control to the
required position within the steam range
and wait for two to five minutes so that
the iron reaches the set temperature.
Set the Steam Control (on top of the
handle) to the required setting.
Your iron is now ready for use.
Loading ...
Loading ...
Loading ...