Loading ...
Loading ...
Loading ...
4
1. INSTALLATION
1.1. INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on both
sides and above the appliance.
The distance between the rear of the appliance and the
wall behind the appliance should be at least 50mm.
A reduction of this space will increase the Energy
consumption of product.
1.2. INSTALLING TWO APPLIANCES
During installing the freezer
1
and the fridge
2
together
ensure that the freezer is located on the left and the
fridge on the right (as shown on the drawing). Left side
of refrigerator is equipped with special device in order to
avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit
3
(as shown on the drawing). You
can buy it in Service.
1.3. ADJUST DOORS IF AVAILABLE
To level the doors using the adjustable lower hinge
(select models)
If the refrigerator door is lower than the freezer door, raise
the refrigerator door by turning the adjustment screw
counterclockwise using a M10 wrench.
If the freezer door is lower than the refrigerator door,
raise the freezer door by turning the adjustment screw
counterclockwise using a M10 wrench.
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
50mm
50mm
5 mm
max
Loading ...
Loading ...
Loading ...