Loading ...
Loading ...
Loading ...
12
6. RECOMMENDATION IN CASE OF NO USE OF THE APPLIANCE
6.1. ABSENCE / VACATION
In case longer absence its recommended to use up food
and to disconnect the appliance to save energy.
6.2. MOVING
1. Take out all internal parts.
2. Wrap them well, and fix them together with adhesive
tape so that they do not bang together or get lost.
3. Screw the adjustable feet so that they do not touch
the support surface.
4. Close and fix door with adhesive tape and, again using
adhesive tape, fix the power cable to the appliance.
6.3. POWER FAILURE
In the event of a power failure, call the local office of your
electricity supply company and ask how long it is going
to last.
Note: Bear in mind that a full appliance will stay cold
longer than a partially filled one.
If ice crystals are still visible on the food, it may be frozen
again, although flavour and aroma may be affected.
If food is found to be in a poor condition, it is best to
throw it away.
For power failures lasting up to 24 hours.
1. Keep the door of the appliance closed. This will allow
the stored food to stay cold as long as possible.
For power failures lasting more than 24 hours.
1. Empty the freezer compartment and arrange the
food in a portable freezer. If this type of freezer is
not available and, likewise, no artificial ice packs are
available, try to use up the food, which is more easily
perishable.
2. Empty the ice tray.
7. MAINTENANCE AND CLEANING
Before any cleaning or maintenance operation, unplug
the appliance from the mains or disconnect the electrical
power supply.
Periodically clean the appliance with a cloth and a
solution of lukewarm water and neutral detergent
specifically for refrigerator interiors. Never use abrasives.
Never clean refrigerator parts with flammable fluids. The
fumes can create a fire hazard or explosion. Clean the
outside of the appliance and the door seal with a damp
cloth and dry with a soft cloth.
Do not use steam cleaners.
Condenser placed in the rear of the appliance should be
cleaned regularly using a vacuum cleaner.
Important:
The buttons and control panel display must not be
cleaned with alcohol or alcohol-derived substances,
but with a dry cloth.
The refrigeration system pipes are located near the
defrost pan and can become hot. Periodically clean
them with a vacuum cleaner.
To remove or insert the glass shelf, move up the front
part of the shelf to pass the stopper.
Loading ...
Loading ...
Loading ...