Loading ...
Loading ...
Loading ...
13
CONTROLS
options
(∧ or ∨)
Used to enter and exit the
options menu and make
selections.
exit Toggles the options and run
modes.
control
locked
While in the locked state,
you will not be able to
change any settings on the
display nor dispense ice and
water. The “Control Locked”
indicatorwillashandan
audible warning tone is
played.
light Toggles dispenser light On
and Off.
quick freeze
on off
Activates a faster rate for
freezing food. Deactivates
after 12 hours.
ice maker
on-off
Press and hold for three
seconds to toggle the
ice maker in the freezer
compartment “on” and
“off”.
display
on off
Toggles the temperature
displays On and Off.
refrigeration
temp
Allows the temperature
set-points to be adjusted.
Control temperatures range
from +33°F / +1°C to
+47°F / +8°C.
freezer
temp
Allows the temperature
set-points to be adjusted.
Control temperatures range
from -6°F / -21°C to +6°F
/ -15°C.
mode
°F °C
Toggles display from
Fahrenheit to Celsius.
power off Press and hold for three
seconds to turn off the
cooling system. It also
turns off the ice maker and
all dispenser functions.
The display will read
“power off”.
water lter Displays the current status
ofthewaterlter(Good,
Order, or Replace). To reset
thelterstatusto“Good”,
press and hold the “set” key
for three seconds.
air lter Displays the current status
oftheairlter(Good,Order,
or Replace). To reset the
lterstatusto“Good”,press
and hold the “set” key for
three seconds.
default
settings
While in the default option,
press and hold the set key
for three seconds to reset
all refrigerator settings
to their factory default
settings.
set (+ or -) Selects the current menu
selection option.
water Press the “water” key
to select water. A green
indicator light will be
illuminated above the active
feature.
cube Press the “cube” key to
select cubed ice. A green
indicator light will be
illuminated above the active
feature.
crush Press the “crush” key
to select crushed ice. A
green indicator light will be
illuminated above the active
feature.
Setting cooling temperatures
NOTE
Whenyourstpowerontherefrigerator,the
temperature displays 0°F and 37°F. After a
few seconds, both of the displays will switch
to “HI”. The displays will continue to show
“HI” for 20 minutes. After 20 minutes, the
High Temp alarm will sound and both
displays will show the actual temperature.
1 Plus (+) and Minus (-) indicators are
located on the right side of the control
panel.
2 Press the + or - indicator to adjust the
temperature to the desired setting.
FRIGIDAIRE GALLERY
Loading ...
Loading ...
Loading ...