Loading ...
Loading ...
Loading ...
S-DD2-L FLUSH TOP18
EN
WARNING
Before connecting the air exhaust hose,
make sure that the non-return valves can
rotate freely.
CAUTION
Installation must comply with the regula-
tions in force regarding the ventilation of
enclosed environments. In particular, dis-
charged air must not be conveyed into a
duct used for fumes discharge or discharge
from appliances using gas
or other combustible materials. The use of
discontinued ducts is not allowed without
the approval of a qualified technician.
WARNING
After having replaced the filters, reinstall the
front stainless steel pan’el, otherwise the
Downdraft is not enabled to function.
9. For external motors, connect the motor unit
cable to the relevant connector on the elec-
trical components box.
10. Power the cookerhood.
HOW TO USE THE COOKER HOOD
This appliance is intended to suck cooking
fumes, greases and steam. It has been designed
to work in both suctioning mode, with outside
evacuation, and filtering mode.
Outside - discharge version
The cooker hood can be mounted in the version
with outside discharge of suctioned air: in this
case it is necessary to connect the exhausting
channel to the outside (exhausting pipes are not
supplied with the products.)
Non-return valve blockage
In case of outside air discharge installation, fit a
non-return valve to prevent wind and back air
from entering.
Filtering mode
In case fumes and vapour cannot be evacuated
outside, the appliance can be used in the filtering
mode.
Activated charcoal filters are required for this
type of cooker hood.
Air recycled through the charcoal filters is recir-
culated into the kitchen, thanks to a duct con-
veying the air on one side of the cabinet (Fig.
11).
GREASE FILTER REMOVAL,
MOUNTING THE ACTIVATED CHAR-
COAL FILTER
The removal and fitting of the grease and carbon
filters need to be carried out with the downdraft in
the open position. To open the downdraft, push
the key. Then remove the front panel, push-
ing the upper part of each side at the same time.
The panel will rotate forwards to make it possible
to access the grease filters (Fig. 6). Remove the
grease filters to access the carbon filters (Fig.
12). The replacement of the charcoal filters has
to be carried out accordingly to the effective use
of the Downdraft, and in any case at least once
every 6 months.
Loading ...
Loading ...
Loading ...