Loading ...
Loading ...
Loading ...
802254 - HT BC, BCHA, AIO, User Guide - June 2015 - V2.00 Page 21 of 24
To change the Filter: (See also Section C)
•
Open the door of the under sink unit.
•
Relieve system pressure via the filter flush stop cock, a quick open and
close will do. Use the bucket to catch the discharge.
•
Grasp filter cartridge, depress the red lever at the top right of the filter and
rotate the cartridge a quarter turn to the left, then gently pull down.
Water Filter
The Zip HydroTap notifies when filter replacement is due. If you notice one of
the following, you will need to change the filter:
•
The Change Filter light will flash white once a second and remain so until
reset. A filter status light is located below the Chilled Blue Lights on the
tap head assembly.
•
The filter percentage will show 0% on the Home screen.
Note:
Depending on local water quality conditions and usage, the filter may
require changing anywhere from 500 Litres to 10,000 Litres. You may also
need to replace the filter if you notice unpleasant odours or tastes.
Some water may drip from the filter
head (socket) during replacement.
Keep a towel handy to dry up any
drips.
Filter Maintenance
Dispense Times
This gives you the ability to change the maximum dispensing time for both
the hot and cold water. The default settings for the maximum dispensing
times is 15 seconds. Here, the operator may change both the hot and cold
dispensing times to between 5 and 15 seconds, in increments of 1 second.
To edit the dispensing times:
LCD Screen operation - Section G
1.
Press [MENU] button for main menu.
2.
Press [Setting] button.
3.
Press [Dispense Time] button.
4.
Select the option to change and
scroll using the up and down arrow
Keys
Loading ...
Loading ...
Loading ...