Loading ...
Loading ...
Loading ...
453
7 Custom Controls
If the metering timer is active, you can select an AF point directly with
the <5> or <9> dial without pressing the <S> button.
*5: With the Quick Control Dial setting screen
displayed, you can press the <B> button, then
set the direction for switching the AF point for when
the <5> dial is turned. The [Direction: AF point
switching] settings for [Horizontal] and [Vertical]
will work for Single-point Spot AF, Single-point AF,
Man. select.: AF point expansion, and Expand AF
area: Surround. The [Direction: Zone AF frame
switch] settings for [Cycle through the zones],
[Horizontal], and [Vertical] will work with Zone AF.
*6: On the Multi-controller setting screen, press the <B> button and you can select
the AF point ([Switch to center AF point] or [Switch to registered AF point]) the
camera will switches to when you press the center of <9>. To register the AF point,
see page 450.
If the metering timer is active, you can select an AF point directly with
<5> without pressing the <S> button. When this function is set, the
functions of the <O> and <S> buttons will be switched between them.
By holding down the <S> button and turning the <6> dial, you can
set the exposure compensation or aperture.
*7: With the setting screen displayed, you can press the <B> button, then set the
direction for switching the AF point for when the <5> dial is turned. The [Direction:
AF point switching] settings for [Horizontal] and [Vertical] will work for Single-point
Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area:
Surround. The [Direction: Zone AF frame switch] settings for [Cycle through the
zones], [Horizontal], and [Vertical] will work with Zone AF.
: Direct AF point selection
: Select AF point O z S ( during metering)
Loading ...
Loading ...
Loading ...