Loading ...
Loading ...
Loading ...
Page:
6
User Manual:
REVERSING THE DOOR SWING
Tools Required: Phillips head screwdriver.
→ Start by ensuring the bar fridge is unplugged and empty.
→ Adjust the two levelling feet to their highest position.
→ To remove the door it is necessary to tilt the bar fridge backwards. Rest the fridge against
something solid to prevent it from slipping whilst removing the door.
→ All parts that are removed will be used when re-assembling the door hinge, so ensure
they are all kept safe .
→ DO NOT lay the bar fridge on its back or sides as this may damage the coolant system.
→ We recommend that this is a two person procedure.
1. Remove the plastic cover from the top door hinge.
2. Unscrew the three screws from the bottom bracket and remove the hinge bracket from
the opposite side. Place this to one side.
3. Slide the fridge door down approximately 15cm and remove from the top hinge, lifting
the door away from the fridge.
4. Remove the two screws from the top bracket and replace the bracket using the same
screws on to the opposite side. Note: You will need to remove the plastic cover caps from
the opposite side rst.
5. Slide the fridge door back onto the top hinge, ensuring that it is the correct way up.
Then screw the bottom hinge bracket into place, securing the door in place.
6. Fit the plastic cover caps and ensure that the door is aligned both vertically and
horizontally, before tightening the bottom hinge. Re-adjust the levelling feet.
1 3
4 5 5
2
Loading ...
Loading ...
Loading ...