Loading ...
Loading ...
Loading ...
en-us
15
Drawers in the refrigerator compartment
Pull out the drawer all the way, lift up and remove.
To insert drawer, place the drawer on the telescopic
rails and push into the appliance. Attach the drawer by
pressing it down.
Note:
Before the vegetable drawer can be taken out, the
glass shelf above must be taken out.
Taking out the frozen food container
Pull out the frozen food container all the way, lift at the
front and remove.
Cleaning the ice cube container
If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together. Therefore, the ice cube container should
be cleaned regularly.
, CAUTION:
A full ice cube container is heavy.
1.
Switch the ice maker on/off button to "0". The ice
maker is switched off.
2.
Remove the ice cube container.
3.
Empty the container and clean with lukewarm water.
4.
Thoroughly dry the container to prevent new ice
cubes from sticking.
5.
Insert the ice cube container.
Ice cube production continues.
6.
Switch the ice maker on/off button to "I".
Ice cube production restarts.
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorized technicians only.
Tips for saving energy
■ Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator, stove).
If required, use an insulating plate.
■ Allow warm food and drinks to cool down before
placing in the appliance.
■ Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
■ Open the appliance as briefly as possible.
■ Occasionally clean the rear of the appliance
to prevent increased power consumption.
■ If available:
Fit wall spacers to obtain the indicated energy
absorption of the appliance (see Installation
instructions). A reduced wall gap will not restrict the
function of the appliance. The energy rating may
then increase slightly.
■ The arrangement of the fittings does not affect
the energy absorption of the appliance.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigeration units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing or water is
flowing into the ice maker.
Clicking
Motor, switches or solenoid valves are switching On/
Off.
Rumbling
Ready ice cubes from the ice maker are falling into
the ice cube container.
Preventing noises
The appliance is not level
Please align the appliance with a spirit level. Use the
height-adjustable feet or place packing underneath
them.
The appliance is not free-standing
Please move the appliance away from adjacent units or
appliances.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly, if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away from each
other.
Loading ...
Loading ...
Loading ...