Loading ...
Loading ...
Loading ...
en Installation and connection
18
Drainage into a siphon
The connection point must be secured
with a Ø 24–40 mm hose clip
(specialist store).
Connecting
Drainage into a plastic pipe
with rubber sleeve or into
a gully
Connecting
Alignment
1. Loosen the lock nut in a clockwise
direction with a wrench.
2. Check the alignment of the washer
dryer with a spirit level and, if
required, correct. Adjust the height
by rotating the appliance foot.
Note: All four appliance feet must
be firmly on the floor.
The washer dryer must not wobble!
3. Tighten the lock nut against the
housing.
Grip the foot and do not adjust the
height.
Notes
■ The lock nuts on all four appliance
feet must be screwed tightly against
the housing!
■ Any loud noises, intense vibrations
or “wandering” may be due to
incorrect alignment!
Loading ...
Loading ...
Loading ...