Loading ...
Loading ...
Loading ...
7
Oven Vent Location
The oven vent is located above the control panel (See
Figure 1). When the oven is on, warm air passes through
this vent. This venting is necessary for proper air circulation
in the oven and good baking results. Do not block oven
vent. Steam or moisture may appear near the oven vent.
This is normal.
Oven Racks
• Flat or flat handle oven racks may be used for most
cooking needs and may be placed in most oven rack
positions.
Arranging, Removing, and Replacing Oven Racks
To arrange - Always arrange the oven racks when the oven
is cool (prior to operating the oven).
To remove - Pull the oven rack straight forward until it
reaches the stop position. Lift up front of oven rack slightly
and slide out.
To replace - Place the oven rack on the rack guides on
both sides of oven walls. Tilt the front of oven rack upward
slightly and slide the oven rack back into place. Be sure
oven racks are level before using.
Figure 1: Oven vent location
Protective liners — Do not use aluminum foil or any other
materials to line the oven bottom, racks, or any other part
of the oven. Doing so will alter heat distribution, produce
poor baking results and may cause permanent damage to
the oven interior.
Only use aluminum foil as recommended in this manual.
Improper installation of these liners may result in risk of
electric shock or fire.
Always use pot holders or oven mitts when using the
oven. When cooking, the oven interior and exterior, as
well as the oven racks, will become very hot which can
cause burns.
Remove all racks and accessories from the oven before
cleaning.
Oven Vent
WARNING
CAUTION
IMPORTANT
Figure 2: Oven rack types
at
oven rack
at handle
oven rack
BEFORE SETTING OVEN CONTROLS
Loading ...
Loading ...
Loading ...