Loading ...
Loading ...
Loading ...
312
You can shoot movies while recording
sound with the built-in stereo
microphones or a commercially-available
external stereo microphone. You can
also freely adjust the sound-recording
level.
Set the sound recording with [
z
4:
Sound recording
].
[
Auto
] : The sound-recording level is adjusted automatically. Auto
level control will operate automatically in response to the
sound level.
[
Manual
] : For advanced users. You can adjust the sound-recording
level to one of 64 levels.
Select [
Rec. level
] and turn the <
5
> dial while looking at
the level meter to adjust the sound-recording level. Look at
the peak hold indicator, and adjust so that the level meter
sometimes lights up on the right of the “12” (-12 dB) mark
for the loudest sounds. If it exceeds “0”, the sound will be
distorted.
[
Disable
] : Sound will not be recorded.
[
Wind filter
] : When set to [
Auto
], it reduces wind noise when there is
wind outdoors. This feature takes effect only with the
built-in microphones. When the wind filter function takes
effect, low bass sounds will also be reduced.
[
Attenuator
]: Automatically suppresses sound distortion caused by
loud noises. Even if you set [
Sound recording
] to [
Auto
]
or [
Manual
] before shooting, sound distortion may still
result if there is a very loud sound. In such a case, setting
it to [
Enable
] is recommended.
3 Setting the Sound Recording
Sound Recording/Sound-Recording Level
Wind Filter/Attenuator
Loading ...
Loading ...
Loading ...