FORTEM FRTM-DAC Tire Inflator Portable Air Compressor 150PSI

1. Overview

The FORTEM Tire Inflator is a portable, 12V DC electric air compressor designed for inflating vehicle tires and other inflatables. It features a digital pressure gauge, automatic shut-off, and a built-in LED light.

2. Features and Specifications

2.1 Key Features

• Digital Pressure Gauge: Displays current and target PSI.
• Automatic Shut-Off: Stops inflation automatically when the preset pressure is reached.
• LED Flashlight: Integrated light for use in low-light conditions.
• Portable Design: Compact unit with a carrying handle and included storage case.
• Multi-Purpose: Includes nozzle attachments for tires, sports balls, air mattresses, and pool toys.
• 14ft Power Cord: Extended reach from the vehicle's 12V power outlet.

2.2 Technical Specifications

• Power Source: 12V DC (Vehicle Cigarette Lighter Socket)
• Maximum Pressure: 150 PSI
• Operation Mode: Automatic
• Material: Metal and Plastic
• Item Weight: 862 Grams
• Dimensions (L x W x H): 15.6 x 19.4 x 7.5 cm
• Included Components: Tire Inflator unit, Nozzle Attachments (3), Carrying Case.

3. Parts and Components

• Main Unit: Houses the motor, digital display, and control switch.
• Digital Display: Shows current tire pressure and preset target value.
• Control Switch: Rocker switch to turn the inflator ON/OFF.
• Pressure Setting Buttons (+/-): Used to set the desired PSI.
• Air Hose: Flexible hose with a chuck for connecting to tire valves.
• Power Cord (14ft): Plugs into a standard 12V DC vehicle power outlet.
• LED Light: Located on the front of the unit.
• Nozzle Storage Compartment: Holds the additional nozzle attachments.
• Carrying Case: Zippered bag for storage and transport.

4. Use Guide

Safety Warning: Always start your vehicle's engine before using the inflator. Operating the compressor with the engine off may drain the vehicle's battery.

4.1 Inflating a Vehicle Tire

1. Start your vehicle's ignition.
2. Connect the power plug to your vehicle's 12V DC (cigarette lighter) power outlet.
3. Set the desired PSI using the (+) and (-) buttons on the digital display. The display will blink while setting.
4. Wait for the display to stop blinking. This indicates the target pressure is set.
5. Attach the air hose chuck firmly onto the tire's valve stem.
6. Flip the ON/OFF switch to the ON position. The inflator will begin pumping and the digital display will show the rising pressure.
7. The inflator will automatically shut off when the preset PSI is reached.
8. Disconnect the air hose from the valve stem and then unplug the power cord from the vehicle.

4.2 Inflating Other Items (Balls, Toys, Mattresses)

1. Select the appropriate nozzle attachment from the storage compartment.
2. Screw the nozzle onto the end of the air hose.
3. Follow steps 1-4 from section 4.1 to power the unit and set a target PSI (if applicable). For items without a specific PSI, you can monitor inflation visually.
4. Press the nozzle firmly onto the item's inflation valve.
5. Flip the ON/OFF switch to ON to begin inflation. Monitor the process and turn the unit off manually when complete.

5. Care and Maintenance

• Store the inflator in the provided carrying case when not in use.
• Keep the unit clean and dry. Wipe with a damp cloth if necessary.
• Do not submerge in water or use in rainy conditions.
• Allow the motor to cool down for 10-15 minutes after continuous use for 10 minutes to prevent overheating.
• Periodically check the air hose and power cord for signs of wear or damage.
• Store the nozzle attachments in the dedicated compartment to prevent loss.

6. Troubleshooting

• Unit does not turn on: Ensure the vehicle ignition is on. Check that the power plug is fully inserted into the 12V outlet. Verify the vehicle's fuse for the outlet is not blown.
• Inaccurate pressure reading: Ensure the air hose chuck is securely attached to the valve stem with no air leaks. The unit may need to cool down if used extensively.
• Inflator does not auto-shutoff: Confirm the target PSI was correctly set (display stops blinking). Check for significant air leaks during inflation.
• LED light does not work: The light is automatic. Ensure the unit is powered on.
• Motor is noisy or overheats: This is normal operation for a small compressor. Stop use and allow the unit to cool down if it becomes excessively hot.

7. Warranty and Support

This product is covered by a One (1) Year Limited Warranty from the date of purchase.

For warranty service or product support, please contact the manufacturer:

FORTEM / Ennovative Ecommerce Inc.
401 Ryland Street, Suite 200A
Reno, Nevada 89502
USA