Loading ...
Loading ...
Loading ...
E-65
ENGLISH
Tape Recording
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
H Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the TAPE 1 cassette
compartment. Insert a blank tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is the same length as the
master tape.
3
Press the TAPE (1
V
2) button
until “TAPE 1” appears on the
display.
The reverse mode will be set to “ ”.
4
Press the
I6
button.
Recording will be paused.
5
Press the
0
button to start dubbing.
To stop dubbing:
Press the H button.
TAPE 1 and TAPE 2 will simultaneously stop.
H Erasing recorded tapes
1. Load the tape to be erased into the TAPE 2 cassette compartment with the
side to be erased facing toward you.
2. Press the TAPE (1 V 2) button until “TAPE 2” appears on the display.
3. Set the
button to “ ” to erase only one side and to “ ” to erase both
sides.
4. Press the I6 button.
5. Press the 0 button to erase side A, or the 1 button to erase side B.
To erase both sides, begin with side A. (If erasing is started from side B, the
tape will not switch over to side A.)
Note:
Make sure that the TAPE 1 is not in use.
Recording to a cassette tape (continued)
1
2
3
4
5
6
7
8
9
SHARP TINSZA159AWZZ
(S)
10
*CD-G7500DVD(EN)60-65 05.1.13, 14:4565
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...