Loading ...
Loading ...
Loading ...
This is due to the minimum absorption of water by the
coffee grounds.
7. Pour the water into the water reservoir. Close the lid and
place the empty decanter onto the warming plate.
NOTE: Make sure the decanter is fully placed on the
warming plate or the water and the grounds will overflow
from the filter basket. An overflow may cause personal
injury or damage to property.
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not
add cold water to the decanter if the decanter is
already hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1. After completing the steps in the “Adding Water and
Ground Coffee” section and with the decanter and the
filter basket securely in place, turn the coffeemaker on.
For Programmable models: Press the ON Button to begin
the brewing cycle.
The blue indicator light will turn on to signal that the
coffeemaker is brewing. When the brewing cycle is
complete the coffeemaker switches over to the warming
mode.
Your coffeemaker will keep your coffee hot for 2 hours,
then automatically shut off. Thermal units will shut off
immediatly after the brewing cycle is complete. While the
coffee is brewing, the Pause n’ Serve feture allows you
to sneak a cup of coffee from the decanter. REPLACE THE
DECANTER ON THE WARMING PLATE WITHIN 30 SECONDS
TO PREVENT OVERFLOW AND POSSIBLE INJURY.
To turn the coffeemaker off, push the OFF button.
For Switch models: Press the ON/OFF Switch on the
control panel so the blue indicator light illuminates. The
light indicates that the coffeemaker is on and that the
brew cycle will begin.
While the coffee is brewing, the Pause ’n Serve feature
allows you to sneak a cup of coffee from the decanter.
REPLACE THE DECANTER ON THE WARMING PLATE WITHIN
30 SECONDS TO PREVENT OVERFLOW AND POSSIBLE
INJURY.
To turn off the coffeemaker, push the switch so the light
is no longer illuminated.
If the brew basket overflows or fails to empty into
the decanter, do not open the brew basket. Turn
off the coffeemaker. Unplug the coffeemaker and
wait for the contents to cool before handling.
2. After the used coffee grounds have cooled, carefully
discard them.
3. Make sure the decanter is empty before starting to brew
coffee.
4. Be sure to turn your coffeemaker off when no longer
using it.
E11 E12
BVMC-DW12CUP_15ESM1.indd 13-14 2/6/15 11:41 AM
Loading ...
Loading ...
Loading ...