Loading ...
Loading ...
Loading ...
Water Filtration System: (Not Included. Available at
your favorite retailer or visit the web site
www.mrcoffee.com)
Your coffeemaker has been designed to use the MR. COFFEE
®
water filtration system. Using the Mr. Coffee
®
carbon-based
water filter in the Mr. Coffee
®
coffeemaker during the brewing
process helps remove up to 97% of the chlorine from the
water and improves the taste of your coffee.
First, look for the MR. COFFEE
®
Filtration
Friendly symbol on the bottom of
your filter basket. If you do not see this
symbol, please call 1-800-672-6333.
To use the water filtration system in your
MR. COFFEE
®
Coffeemaker, please follow
these steps:
1. Align the red indicator on the frame
to the letter that corresponds with
the month that you are
using the disk for the first
time. This serves to remind
you to change the disk
every month (approx. 30
brewing cycles). (Figure 2)
To change the disk, remove
the used disk, insert new
disk into the frame.
NOTE: For optimum results, use
the water filtration system with
a permanent filter.
2. Rinse the water filter in fresh water before first use.
3. Follow “Adding Water and Ground Coffee” Instructions
in the next section.
4. When you are done brewing your coffee, rinse the water
filter with fresh water. Do not put your water filter in the
dishwasher.
Adding Water and Ground Coffee:
1. Lift and open the filter basket lid. For your convenience,
you can lift out the removable filter basket.
2. Place a MR. COFFEE
®
brand 10-12 cup paper basket-
style filter or a MR. COFFEE
®
permanent filter into the
removable filter basket. (Figure
3)
NOTE: If using paper filters, it
is important that the sides of
the filter fit flush against the
side of the filter basket. If filter
collapse occurs, dampen the
filter before placing in the filter
basket and adding ground
coffee and water.
3. Add the desired amount of
coffee and gently shake to level the coffee. See the
“Suggested Coffee Measurement Chart”.
4. If using the MR. COFFEE
®
Water Filtration System, after
following instructions in the Water Filtration System
section, place the MR. COFFEE
®
water filter in the basket,
making sure that the side marked “this side up” faces you
and that the water filter is level.
5. Be sure the filter basket is properly centered and all the
way down in the filter basket.
6. Fill the decanter with cold, fresh water to the desired
capacity (1 cup equals 5 ounces). For easy and accurate
filling, the water markings on the glass decanter and
on the dual water windows show the amount of water
needed to make the corresponding desired number of
cups. Do not fill past the “MAX line” or water will flow
out of the overfill hole in the back of the water reservoir.
The amount of coffee brewed will always be slightly less
than the amount of water poured in the water reservoir.
Frame
Filter Disk
(Figure 2)
Red
Indicator
E9 E10
(Figure 3 – Adding water
and ground coffee)
BVMC-DW12CUP_15ESM1.indd 11-12 2/6/15 11:41 AM
Loading ...
Loading ...
Loading ...