Loading ...
Loading ...
Loading ...
Connecting The Jumper Cables
1. Wear eye protection and remove any metal jewelry such
as watchbands or bracelets that might make an inadver-
tent electrical contact.
2. When boost is provided by a battery in another vehicle,
park that vehicle within booster cable reach, but without
allowing the vehicles to touch one another.
3. Set the parking brake, place the transmission in NEU-
TRAL, and turn the ignition OFF on both vehicles.
4. Turn off the heater, radio, and all unnecessary electrical
loads.
5. Remove the plastic fuse cover to gain access to the
remote jump-start positive (+) post in the engine com-
partment. Refer to the following illustration for remote
jump-starting connections.
CAUTION!
Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.
Remote Jump Start Connections
1 — Remote Positive (+) Post
2 — Remote Negative (-) Post
268 WHAT TO DO IN EMERGENCIES
Loading ...
Loading ...
Loading ...