Loading ...
Loading ...
Loading ...
10 Control panel-function buttons
To get best results in each programme Haier has well defined specific default
settings. If there is no special requirement, default settings are recommended.
Accordingly to these factory settings many programme parameters and
additional functions could be individually changed.
“Delay”-Start time delay (Button a)
“Speed Up” (button b)
Touch it to increase washing speed and reduce washing
time.
General information and tips:
End time must always be longer than programme cycle time. Otherwise
operation will start immediately, and the end time chosen will be never reached.
cd
“Temp” (button c)
Touch it to change the washing temperature of the
programme. If there is no value the water is not heated.
“Spin Speed” (button d)
Touch it to rinse the laundry more intense with fresh
water. This is recommended for people with sensitive
skin. One to three additional rinse cycles are available.
“Rinse” (button e)
e
Display symbols-Control panel
“Child lock” (button a+b)
The “Child Lock” function stops any further changes
to the set program. To active, hold the “Delay” and
“Speed Up” buttons at the same time for 3 seconds.
Panel elements will be blocked after hearing an
indicating voice. To deactivate the “Child Lock” hold
the “Delay” and “Speed Up” buttons at the same time
for 3 seconds.
“Memory function” (button c+d)
The “memory function” is used to record the current
settings, such as temperature, spin speed, rinse time
and ect. To active, hold the “Temp” and “Spin Speed”
buttons at the same time for 3 seconds. To deactivate
the “memory function” hold the “Temp” and “Spin
Speed” buttons at the same time for 3 seconds.
Display
The display shows following information:
1. Washing time
2. End time del ay
3. Error codes and service information
During operation display will be deactivated after
two minutes until programme selector is turned or a
button is touched.
Symbols of the display:
Door
Spin
Rinse
Running spin/
drainage cycle
Running Rinse
cycle
Door is locked
(in operation)
Child lock
Memory fuction
Time display
Water
Wash
Running Washing
cycle
fg
“Steam” (button f)
“START/PAUSE” (button g)
a
b
Steam mode
With Steam Plus it is possible to inactivate common
household bacteria and allergens when selecting
steam mode and 90 degrees wash temperature* on
Cotton, Eco, Towels, Allergy or Baby Care wash
programs. The cycles with a blue line around the dial
have steam mode available.
*Washing at 90 degrees may cause damage to some garments. Use this option
only for durable fabrics and follow the recommendations of care labels.
Touch it to increase programme end time in increments
of 30 minutes from 2hr – 24hr. Press the Start/Pause
button once you are satisfied with the delayed end time.
You will note the countdown of the delay time com-
mence and subsequently the remaining programme
cycle time will be displayed. The related symbol to the
operation will display.
Touch it to start or interrupt the currently displayed
programme.
Touch it to change or deselect the spin of the program-
me. If there is no value, the laundry will not run.
Loading ...
Loading ...
Loading ...