Loading ...
Loading ...
Loading ...
86
uuIndicatorsu
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
Vehicle Stability
Assist® (VSA®)
System Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Blinks when VSA® is active.
●
Comes on if there is a problem
with the VSA® system or hill start
assist system.
●
Stays on constantly - Have your vehicle
checked by a dealer.
2 Vehicle Stability Assist® (VSA®), aka
Electronic Stability Control (ESC),
System P. 507
●
Comes on if the VSA® system is
deactivated temporarily after the
battery has been disconnected,
then re-connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
Vehicle Stability
Assist® (VSA®)
OFF Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Comes on when you partially
disable VSA®.
2 VSA® On and Off P. 508
●
Comes on if the VSA® system is
deactivated temporarily after the
battery has been disconnected,
then re-connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
19 CR-V ELP HCM MAP HMIN-31TLA6200.book 86 ページ ２０１８年８月２２日 水曜日 午後２時５９分
Loading ...
Loading ...
Loading ...