Loading ...
Loading ...
Loading ...
4
IMPORTANT SAFETY INSTRUCTION
Thank you for purchasing KitchenWare Station Electric Slicer. Each unit has been manufactured
to ensure safety and reliability. Before using for the first time, please read the instructions
carefully and keep them for further reference.
WARNING! READ AND SAVE THESE INSTRUCTIONS. Failure to follow all of the
instructions listed below may result in electric shock, fire and/ or serious personal injury.
❖ NEVER touch slicer without training and authorization from your supervisor or if you are
under 18 years old.
❖ Read this manual thoroughly before installation and operation. DO NOT continue with
installation and operation if you have any questions or do not understand anything in
the manual. Contact KitchenWare Station Customer Service Department for further
assistance.
❖ To avoid electrical hazards, do NOT place the slicer in or near water or other liquid.
❖ Plug only into grounded electrical outlets matching the nameplate rated voltage.
❖ Do NOT operate unattended.
❖ ONLY install slicer on a level, nonskid surface in a clean, well-lighted work area away
from children and visitors.
❖ Do NOT use an extension cord with this equipment.
❖ Do NOT plug this equipment into a power strip or multi-outlet power cord.
❖ Do NOT turn equipment on unless all guards are in place.
❖ Check equipment before each use to ensure the equipment is clean.
❖ Wear proper apparel. Do not wear loose fitting or hanging garments while operating
this equipment.
❖ It is forbidden to cut materials such as wood, plastic, paving tiles, bricks, stones, glass,
metals, leather, cardboard, fabrics, bone, etc.
❖ Unplug equipment, turn off and let it cool before cleaning or moving.
❖ Do NOT spray controls or outside of equipment with liquids or cleaning agents.
❖ Do NOT clean the equipment with steel wool or high-pressure spray gun.
❖ Keep equipment and power cord away from open flames, electric burners or excessive
heat.
❖ Do NOT operate if equipment has been damaged or is malfunctioning in any way.
❖ NEVER push product into the slicer using your hands or any other object except the
provided product grip handle.
❖ Before cleaning, servicing, or removing any parts, always turn slicer off and unplug unit.
❖ Keep unit UNPLUGGED when not in use to prevent accidental start up.
Loading ...
Loading ...
Loading ...