Loading ...
Loading ...
Loading ...
12
OPERATION
The control panel is located just above the door, and looks like this:
Control Panel
Adjust the DOWN or UP button on the control panel until the display module shows the
desired temperature.
Setting the Temperature
The display module shows the set temperature, and the temperature-controlled range
varies from 32 to 50°F (0 to 10°C).
The display module shows 5°C at the initial power up. Each press of the DOWN or UP
button decreases or increases the temperature displayed by 1°C (1°F).
The optimal temperature for the storage and distribution of beer is 34 - 38°F (1.1 to
3.3°C.
You can switch between a Celsius and Fahrenheit temperature display by pressing the
°F/°C button. When the displayed temperature is in Celsius, the “°C” symbol will be
illuminated; with a Fahrenheit display, “°F” will be illuminated.
Switching between Celsius and Fahrenheit
Press the Deep Chill button to enter the Rapid Cooling state. The “rapid cooling” icon on
the display module will light and the temperature display will read “00”. After entering
the Rapid Cooling mode, the appliance will work continuously for 24 hours and the icon
will remain lit. After that time, the icon will turn off and the appliance will return to its
former state.
‘Rapid Cooling’ Function
You can cancel the Rapid Cooling mode any time during the 24 hour period by simply
pressing the Deep Chill button again.
Note: The Rapid Cooling function is normally used only for cooling the first keg of beer
in the appliance, when that keg is to be used as soon as possible. To prevent over-
cooling the beer, do not use Rapid Cooling for succeeding kegs.
DOWN: Lowers UP: Raises Display module Fahrenheit/Celsius Rapid
temperature temperature switching cooling
Loading ...
Loading ...
Loading ...