Loading ...
Loading ...
Loading ...
11
Chapter 9: PROGRAMMING YOUR DEVICE
1. Turn the device ON
• Press “ON/OFF” button to turn the unit ON.
• The most recently selected treatment status is displayed.
2. Turn the device OFF
• The device turns off automatically after the therapy session time has elapsed.
• The device will turn off after 60 seconds if no button is pushed.
• To turn the unit off manually, press “ON/OFF” button for 3 seconds.
Note: To prevent unpleasant electric shocks, never move the lead wires or electrodes while the
device is still turned on.
3. Mode Selection
The device features 3 different Modes: Constant ( C ), Burst (B), Modulated Width (M).
• To change the Mode, press the “MODE” button. The device will display your settings. Press
“MODE” again and your last selected Mode will start ashing.
• To make changes, press the “UP” or “DOWN” button.
• Once you have selected your Mode, press the “MODE” button again and the pulse rate starts
ashing. Continue with step 4.
4. Parameter Setting (pulse rate and width)
To adjust the pulse width and pulse rate settings, follow these steps:
• To adjust the pulse rate (Hz), push the “UP” or “DOWN” button (1 – 150Hz).
• Press the “MODE” button and the pulse width starts ashing (uS). Press the “UP” or “DOWN”
button to change the pulse width (30 – 300uS).
• Once you are done changing the pulse rate and pulse width, press the “MODE” button and
the display stops ashing indicating your programming is nished. The display will show your
nal programming.
Note 1:
When the device is in use and the “MODE” button is pushed 1 time, it will show the current
programming. To make changes, press the “MODE” button again, all intensity levels will turn to “0”
and the mode function will start ashing. Please follow above steps to make changes.
Note 2:
If no button is pushed for 10 seconds while in programming mode, the device will stop ashing. To
return into programming mode follow steps above by pressing the “MODE” button.
Note 3:
If the device is in programming mode (intensity bars are at “0”), the device will automatically turn
OFF after 60 seconds if no button is pushed.
Loading ...
Loading ...
Loading ...