Loading ...
Loading ...
Loading ...
500
7-2. Steps to take in an emergency
SEQUOIA_OM_USA_OM0C021U_20MY
Confirm that the tire is not loose
after tightening:
Push and pull the tire
Try rotating
Visually check to ensure the tire
is not hung on surrounding parts.
If looseness or misassembly
exists, repeat step and step
.
Repeat step any time the tire is lowered or disturbed.
Stow the tools and jack securely.
■ The temporary spare tire
● The temporary spare tire is identified by the “TEMPORARY USE ONLY”
marking on the disc wheel and/or tire sidewall.
Use the temporary spare tire temporarily, and only in an emergency.
● Make sure to check the tire inflation pressure of the temporary spare
tire. (→P. 527)
■ After completing the tire change
The tire pressure warning system must be reset. (→P. 427)
■ When using the spare tire
As the spare tire is not equipped with a tire pressure warning valve and
transmitter, low inflation pressure of the spare tire will not be indicated by
the tire pressure warning system. Also, if you replace the spare tire after
the tire pressure warning light comes on, the light remains on.
■ If you have a flat rear tire on a road covered with snow or ice
Install the temporary spare tire on one of the front wheels of the vehicle.
Perform the following steps and fit tire chains to the rear tires:
Replace a front tire with the temporary spare tire.
Replace the flat rear tire with the tire removed from the front of the vehi-
cle.
Fit tire chains to the rear tires.
3
2
3
4 3
5
1
2
3
Loading ...
Loading ...
Loading ...