Loading ...
Loading ...
Loading ...
44
3 Daily operation
T Open the cover of the grinder adjustment
switch.
< T Press the Espresso button to start prepara-
tion.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY
Hot water
J CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:
READY is displayed.
T Place a cup under the hot-water spout.
m T Press the Hot Water button.
WATER, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the IMPRESSA is switched on, a rinse opera-
tion is automatically initiated. In programming
mode you can change this setting so that the
machine prompts you to perform the switch-on
rinse, which must be started by pressing the
Maintenance buttonc (see Chapter 4 ‘Permanent
settings in programming mode – Rinses’).
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
HEATING
RINSING, the system rinses itself.The
operation stops automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your IMPRESSA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
E In the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approx. every 3 months). Replacement
pipes are available from specialised dealers.
Switching off the machine
When the IMPRESSA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared. If cappuccino or latte macchiato has
been prepared, cappuccino frother rinsing also
takes place.
Loading ...
Loading ...
Loading ...