Loading ...
Loading ...
Loading ...
42
2 Preparation
Latte macchiato, cappuccino
Your IMPRESSA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Latte macchiato ( and cappuccino / are pre-
pared following this model.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:
READY is displayed.
T Place a glass under the dual spout.
T Remove the protective cover of the dual
spout.
T Connect the milk pipe to the dual spout.
T Immerse the other end of the milk pipe in a
receptacle with milk (figure: optional
stainless steel vacuum milk container, 0.4
litres, from JURA).
E Ensure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
( T Press the Latte Macchiato button.
LATTE MAC., the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
PAUSE
E There is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form. You can choose the length of this
interval in programming mode (see
Chapter4 ‘Permanent settings in program-
ming mode – Products’).
LATTE MAC., coffee preparation starts.
The preset amount of water flows into the
glass.
Preparation stops automatically.
READY
To ensure that the milk system in the dual spout
always works properly, you must clean it daily (see
Chapter 5 ‘Maintenance – Cleaning the milk
system’).
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
of water will be dispensed.
Example:Permanently adjust the amount of
cappuccino to the cup size.
Precondition:
READY is displayed. Milk is
connected to the dual spout.
T Place a cup under the dual spout.
/ T Press and hold the Cappuccino button until
ENOUGH MILK? appears.
/ T Release the Cappuccino button.
The milk foam is prepared.
T Press any button as soon as there is
sufficient milk foam in the cup.
OK
ENOUGH COFFEE?, the coffee flows
into the cup.
Loading ...
Loading ...
Loading ...