User Manual Electrolux EDH903BEWA - 9kg Ultimate Care Heat Pump Dryer

• User Manual - (English)

• EDH903BEWA - Electrolux - Specifications Sheet - (English)

Table of contents

• PRODUCT DESCRIPTION
• CONTROL PANEL
• WI-FI - CONNECTIVITY SETUP
• PROGRAMME TABLE
• OPTIONS
• DAILY USE
• HINTS AND TIPS
• CARE AND CLEANING
• TROUBLESHOOTING

PRODUCT DESCRIPTION

• For ease of loading laundry or ease of installation the door is reversible. (see separate leaflet).

CONTROL PANEL

Display

WI-FI - CONNECTIVITY SETUP

This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to a mobile devices.

By this functionality you can receive notifications, monitor and control your tumble dryer from your mobile devices. To connect the appliance to enjoy the full range of features and services you need:

• Wireless network at home with internet connection enabled.
• Mobile device connected to wireless network.

Installing and configuring Electrolux Life

When connecting the tumble dryer to the application, stand near it with Your smart device.

Make sure that your smart device is connected to the wireless network.

1. Go to the App Store on your smart device.
2. Download and install App Electrolux Life .
3. Make sure you started a Wi-fi connection in the dryer. If not go to the section below.
4. Start the application. Select the country and language and login with Your email and password. If you do not have an account, create a new one following the instructions in Electrolux Life.
5. Follow the instructions on the App for the appliance registration and configuration.

A message appears on the appliance display to confirm that the configuration was successful.

Configuring the dryer wireless connection

Have Electrolux Life downloaded and installed on your smart device.

1. Press the on/off button for a few seconds to activate the appliance.
2. Select a programme by turning the programme dial.
3. Press and hold Remote touch button for 3 seconds.

The text pop up for about 5 seconds and the icon starts flashing and wireless module begins starting up. It may takes about 45 seconds before it is ready. When the wireless module is ready, the text (Access Point) is on to inform you, that the access point will be open for about 3 minute.

4. Configure the Electrolux Life app on your smart device.

5. If the connectivity is configured, (Access Point) symbol is off and the icon will stop blinking and lit steadily to confirm that the configuration was successful.

To switch the wireless connection off,Press and hold Remote touch button for 3 seconds until the first acoustic signal: appears on the display.

If you switch the appliance off and on again, the wireless connection is automatically off.

To remove the wireless credentials,Press and hold Remote touch button for 10 seconds until the second acoustic signal: appears on the display.

Remote Start

When the App is installed and the wireless connection is complete, you can start and stop a drying programme remotely by activate remote start.

Activate Remote Start

1. Press the Remote button and the indicator appears on the display.
2. Press the Start/Pause button to activate the Remote Start.

The indicators appears on the display. Now it is possible to start the programme remotely.

Deactivate Remote Start

Press the Remote touch button and confirm by pressing the Start/Pause button.

The icon is off and the remote start is deactivated.

Over-the-air update

The App may propose an update for downloading new features.

The update is accepted via App only. If a programme is running, the App notifies that the update will start at the end of the programme.

During the update, the appliance shows in the display.

The appliance will usable again at the end of the update, without any notification about successful update.

If an error occurs, the appliance shows in the display: just press any buttons or turn the knob to return to normal use.

PROGRAMME TABLE

1. The maximum weight refers to dry items.
2. For fabric mark meaning see chapter HINTS AND TIPS: Preparing the laundry.
3. For test institutes only: the Cottons program in combination with the extra dry Dryness Level is the “Standard cotton program”. It is suitable for drying normal wet cotton laundry and it is the most efficient program in terms of energy consumption for drying wet cotton laundry. Standard programme for tests are specified in the AS/NZS2442.2 document.
4. Only with the Drying Rack (standard accessory or optional, depending on model)

OPTIONS

Extra Anticrease

Extends the anti-crease phase by 30,60, 90 or 2 hours at the end of the drying cycle. This function reduces creases. The laundry can be removed during the anti-crease phase.

Dryness Level

This function helps to increase dryness of the laundry. There are 3 options:

Time Dry

You can set the programme duration, from a minimum of 10 minutes to a maximum of 2 hours. The required duration is related to the quantity of laundry in the appliance.

Time Dry on Wool programme

Option suitable for Wool programme to adjust final dryness level.

Time Dry on Drying Rack programme

Option suitable for Drying Rack programme .

You can set the programme duration, from a minimum of 10 minutes to a maximum of 2 hours. The setting of the duration is related to the quantity of laundry in the appliance.

We recommend that you set a short duration for small quantities of laundry or for only one item.

End Alert

The buzzer sounds at the:

• cycle end
• start and end of the anti-crease phase
• cycle interruption

The buzzer function is by default always on. You can use this function to activate or deactivate the sound.

Reverse Plus

Increase drum reversing frequency to reduce items twisting and entanglement. To increase uniformity of drying result and help reduce creases. Recommended for large or long items (e.g. sheets, trousers, long dresses)"

Extra Silent

The appliance operates with low noise without effect on the drying quality. The appliance operates slowly with longer cycle time.

Options table

DAILY USE

Start a programme without delay start

1. Prepare the laundry and load the appliance.

2. Press the on/off button to activate the appliance.

3. Set the correct programme and options for the type of load.

The display shows the programme duration.

• The drying time you see on the display, when the cotton programme is selected, is related to the load of 5 kg and standard conditions . Real drying time will depend on type of the load (quantity and composition), the room temperature and the humidity of your laundry after spin drying phase.

4. Press the Start/Pause touch button. The programme starts.

Starting the programme with delay start

1. Set the correct programme and options for the type of load.
2. Press the delay start button again and again until the display shows the delay time you want to set.
3. Press the Start/Pause touch button.

The display shows the countdown of the delay start.

When the countdown is completed, the programme starts.

Change a programme

1. Press the on/off button to deactivate appliance
2. Press the on/off button to activate the appliance.
3. Set the programme.

At the end of the programme

When the programme is completed:

• An intermittent acoustic signal operates.
• The display shows
• The indicator is on.
• The indicators Filter and Tank may come on.
• The Start/Pause indicator is on.

The appliance continues to operate with the anti-crease phase for approximately 30 minutes or more if Extra Anticrease option was set (see chapter Option -Extra Anticrease ).

The anti-crease phase reduces creasing.

You can remove the laundry before the anti-crease phase is completed. We recommend, for better results, that you remove the laundry when the phase is almost completed.

When the anti-crease phase is completed:

• The display shows
• The indicator is on.
• The indicators Filter and Tank may come on.
• Start/Pause indicator goes off.

1. Press the on/off button to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.

Always clean the filter and empty the water container when a programme is completed.

Stand-by function

To reduce energy consumption, this function automatically deactivates the appliance:

• After 5 minutes if you do not start the programme.
• After 5 minutes from the end of the programme.

HINTS AND TIPS

Preparing the laundry

• Close the zips.
• Close the fasteners of duvet covers.
• Do not dry ties or ribbons loose (e.g. apron ribbons). Tie them before you start a programme.
• Remove all items from pockets.
• Turn items with the internal layer made of cotton inside out. Cotton layer must be faced outwards.
• Always set the programme suitable for the type of laundry.
• Do not put light and dark colours together.
• Use suitable programme for cottons, jersey and knitwear to reduce shrinkage.
• Do not exceed the maximum load stated in the programmes chapter or shown on the display.
• Dry only the laundry that is suitable for tumble drying. Refer to the fabric label on the items.
• Do not dry large and small items together. Small items can be trapped inside the large items and remain wet.

CARE AND CLEANING

Cleaning the filter

Emptying the water container

You can use the water from the water container as an alternative to distilled water (e.g. for steam ironing). Before you use the water, remove dirt residues with a filter.

Cleaning the Heat Exchanger

Cleaning the drum

WARNING! Disconnect the appliance before you clean it.

Use a standard neutral soap detergent to clean the inner surface of the drum and drum lifters. Dry the cleaned surfaces with a soft cloth.

CAUTION! Do not use abrasive materials or steel wool to clean the drum.

Cleaning the control panel and housing

Use a standard neutral soap detergent to clean the control panel and housing.

Use a moist cloth to clean. Dry the cleaned surfaces with a soft cloth.

CAUTION! Do not use furniture cleaning agents or cleaning agents which can cause corrosion.

Cleaning the airflow slots

Use a vacuum cleaner to remove fluff from the airflow slots

TROUBLESHOOTING

Problem	Possible solution
You cannot activate the appliance.	Make sure that the mains plug is connec‐ ted to the mains socket.
	Check fuse in fuse box (domestic installa‐ tion).
The programme does not start.	Press Start/Pause.
	Make sure that the appliance door is closed.
The appliance door does not close.	Make sure that the installation of the filter is correct.
	Make sure that the laundry is not caught between the appliance door and the rub‐ ber seal.
The appliance stops during operation.	Make sure that the water container is empty. Press Start/Pause to start the pro‐ gramme again.
	Load is too small, increase the load or use the Time Drying programme.
The cycle time is too long or unsatisfacto‐ ry drying result.1)	Make sure that the weight of the laundry is suitable for the duration of the programme.
	Make sure that the filter is clean.
	The laundry is too wet. Spin the laundry in the washing machine again.
	Ensure that the room temperature is higher than +5°C and lower than +35°C. Optimal room temperature is 19°C to 24°C.
	Set the Time Drying or the Extra Dry pro‐ gramme.2)
The App cannot connect to the dryer.	Check if your smart device is connected to the wireless network. Check your home network and router. Restart the router. Contact your wireless service provider if there are problems with the wireless net‐ work.
	The dryer, the smart device, or both, need to be configured again.
The App frequently cannot connect to the dryer.	Try to move the home router as near the dryer as possible or consider purchasing a wireless range extender.
	Turn the microwave off. Avoid using the microwave and the Remote Control of the oven at the same time. The microwaves disrupt the Wi-Fi signal.
The display shows	If you want to set a new programme, de‐ activate and activate the appliance.
	Make sure that the options are suitable for the programme.
The display shows Error code (e.g. E51).	Deactivate and activate the appliance. Start a new programme. If the problem occurs again, contact the Service centre.

1) After maximum 5 hours, the programme ends automatically.

2) It can happen that some area remains humid when drying big items (e.g. bed sheets )

If the drying results are not satisfactory

• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor ( See chapter "Settings -Adjustment of the remaining laundry moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too high ( optimal room temperature 19°C to 24°C )