Loading ...
Loading ...
Loading ...
Gas Leak Test Procedure
The BBQ gas bottle, regulator & hose assembly should be checked for leaks, using the soapy water leak test,
every time you reconnect your regulator to the BBQ gas bottle.
You should also test after any long period of non-use, such as at the beginning of BBQ season
In a small container, mix up a solution of 1/2 water and 1/2 detergent or soap. Mix the solution well.
Make sure that the gas supply valve on the gas cylinder is turned on without turning on the BBQ. This
pressurizes the system.
Make sure that the gas control valves on the appliance are all turned off.
Using a brush or spray bottle apply the solution to the gas line and each join in the gas line.
Bubbling of the solution will indicate that there is a leak present.
Re-tighten or re-seal any joints that are leaking.
Repeat the procedure again.
If a leak persists then contact your distributor or the manufacturer for assistance.
Loading ...
Loading ...
Loading ...