Loading ...
Loading ...
Loading ...
Care and Maintenance
English 15
Replacing the Light Bulbs, cont.
Fixture
Dimmable
Bulb
Suction
Cup
1. (To avoid harming the appliance electrical system
should a short occur) Turn power OFF at the circuit
breaker or fuse box.
2. Wipe the bulb lens clean, then gently press the
suction-cup tool onto the lens.
3. Turn th
e tool left to loosen the bulb, then remove
the bulb from the housing.
4. Attach the suction-cup tool to the lens of the
replacement bulb.
5. Insert the bulb into the housing, and turn the tool
handle right to tighten the bulb.
6. Remove the suction cup, and turn the power ON at
the fuse box or circuit panel.
NOTE
• If buying your own bulb, take the old bulb to the store as reference, or use these specifications:
Dimmable LED 7.5W (max) or dimmable halogen 75W (max), 120V; PAR16, E26/27, 500 lumens.
• If the bulb does not engage, ensure the new bulb's lens is clean, then repeat Steps 4 and 5, being
sure to insert the bulb fully into its housing.
Hood Replacement Parts
Order at www.everything.dacor.com
Dacor Part # Description
702666 Dimmable LED Bulb Replacement Kit (1 bulb + 1 suction cup tool)
702579 Baffle Filter Kit (1 pc + hardware)
702580 Baffle Filter Kit (2 pc + hardware)
Dacor hoods use either baffle or mesh filters. Contact Dacor Customer Assurance for assistance.
This table shows the model numbers and descriptions of the available filter types:
Model # Description
AWHBF2/3/4
Baffle filter: 30” (2 filters); 36” (3 filters); 48” (4 filters)
Loading ...
Loading ...
Loading ...