Loading ...
Loading ...
Loading ...
ASSEMBLE SURFACE BURNERS (CONT.)
There is one oval (center) head and cap assembly
(on some models) and four side heads and caps.
On models so equipped:
On models so equipped:
Make sure that the heads and caps are replaced
in the correct locations.
Grates
Place the left, right and center grates on the cooktop.
These grates are position specific. The undersides of
the left and right grates are marked “LEFT FRONT” and
“RIGHT FRONT.” Place the middle grate with its bowed
front toward the front of the range.
NOTE: Some models only have side grates.
C
B
5
Installation Instructions
ELECTRICAL CONNECTIONS (CONT.)
3
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician before
using the appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSI A225.1, latest edition, or with local codes. In
Canada, mobile home installation must be in
accordance with the current CAN/CSA Z240/MH
Mobile Home Installation Code.
Electric Disconnect
■ Locate disconnect plug on the range back.
■ Pinch sides of connector and pull out of range back.
SEAL THE OPENINGS
4
Seal any openings in the wall behind the range and in the
floor under the range when hookups are completed.
ASSEMBLE SURFACE BURNERS
5
CAUTION: Do not operate the burner
without all burner parts in place.
Place burner heads over the electrodes on the cooktop,
and then replace the burner caps onto the burner heads
in the correct locations according to their size.
A
Left Front
Right Front
Center
42
Medium burner
head and cap
Front of range
Large burner
head and cap
Small burner
head and cap
Extra large
burner head
and cap
Oval head and cap assembly
Slot
Electrode
Slot
Medium burner
head and cap
Front of range
Medium burner
head and cap
Small burner
head and cap
Large burner
head and cap
Make sure the slot in the burner head is positioned over the electrode.
Loading ...
Loading ...
Loading ...