Loading ...
Loading ...
Loading ...
80 Instruments and controls
Note
The sockets must always be kept
clean and dry.
Inductive charging
9 Warning
Inductive charging can affect the
operation of implanted
pacemakers or other medical
devices. If applicable, seek
medical advice before using the
inductive charging device.
9 Warning
Remove any metal objects from
the charging device before
charging a mobile phone, as these
objects could become very hot.
To charge a device, the ignition must
be switched on.
LED status on the charging device
(see arrow):
● Illuminates green:
- mobile phone with inductive
charging functionality was
recognised.
● Illuminates yellow:
- metall objects have been
detected in the charging area.
Remove objects to allow
charging.
- mobile phone was not placed
properly.
PMA or Qi compatible mobile phones
can be charged inductively.
A back cover with an integrated coil
(e.g. Samsung 4 and 5) or a jacket
(e.g. some iPhone models) may be
required to charge a mobile phone.
The mobile phone must be smaller
than 8 cm in width and 15 cm in length
to fit into the charging device.
Protective cover for the mobile phone
could have impact on the inductive
charging.
To charge a mobile phone:
1. Remove all objects from the
charging device.
2. Place the mobile phone with the
display facing upwards on the
charging device.
3. Ensure that the mobile phone is
located at the right bottom corner
of the charging device.
In the case that the yellow LED
illuminates:
1. Remove the mobile phone from
the charging device.
2. Rotate the mobile phone by 180°.
Loading ...
Loading ...
Loading ...